Part Number Hot Search : 
DS2149DK TDA7575B 73D48 DS023 2LP03SP D1010 100BGC 2N5550
Product Description
Full Text Search
 

To Download AT-250 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AT-250
Voltage Variable Absorptive Attenuator 12 dB, DC - 2.0 GHz
Features
* * * * * * * * 12 dB Voltage Variable Attenuation Low Intermodulation Products Low DC Power Consumption: 50 W Single Voltage Control: 0 to -4 Volts Nanosecond Switching Speed Temperature Range: -40C to +85C SOIC-8 Plastic Package Tape and Reel Packaging Available Rev. V4
Functional Schematic
RF2
8
GND
7
GND
6
GND
5
Description
M/A-COM's AT-250 is a GaAs MMIC voltage variable absorptive attenuator in a low cost SOIC 8lead surface mount plastic package. The AT-250 is ideally suited for use where attenuation fine tuning, fast switching and very low power consumption are required. Typical applications include radio, cellular, GPS equipment and other automatic gain/level control circuits. The AT-250 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability.
1
2
3
4
RF1
GND
GND
VC
Pin Configuration
Pin No.
1 2
Function
RF1 Ground Ground VC
Pin No.
5 6 7 8
Function
Ground Ground Ground RF2
Ordering Information 1
Part Number
AT-250 AT-250TR
3 4
Package
SOIC 8-Lead Plastic Package Forward Tape and Reel
Absolute Maximum Ratings 2
Parameter
Input Power Control Voltage Operating Temperature Storing Temperature
Absolute Maximum
+21 dBm +5V, -8.5V -40C to +85C -65C to +150C
1. Reference Application Note M513 for reel size information.
2. Exceeding any one or combination of these limits may cause permanent damage to this device.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
AT-250
Voltage Variable Absorptive Attenuator 12 dB, DC - 2.0 GHz
Electrical Specifications: TA = 25C, Z0 = 50
Parameter Test Conditions3
DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz
Rev. V4
Units
dB dB dB dB dB dB dB dB Ratio
Min
-- -- -- -- -- -- -- -- -- -- -- -- -- -- 28 40
Typ
2.9 3.0 3.2 3.4 + 0.1 + 0.2 + 0.5 + 1.2 2.1:1 3 5 10 13 21 34 47
Max
3.1 3.2 3.5 3.8 + 0.3 + 0.4 + 0.8 + 1.5 -- -- -- -- -- -- -- --
Insertion Loss
Flatness (Peak to Peak) VSWR Trise, Tfall Ton, Toff Transients Power Handling
10% to 90% RF, 90% to 10% RF 50% Control to 90% RF, 50% Control to 10% RF In Band Linear Operation Absolute Maximum Input Power 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (For two-tone Input Power Up to +5 dBm) 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (For two-tone Input Power Up to +5 dBm)
nS nS mV dBm dBm dBm dBm
IP2
IP3
dBm dBm
18 18.5
313 363
-- --
3. Control voltage: 0 to -4 volts @ 20 A typical. 4. For levels above 6 dB attenuation. For levels below 6 dB, the minimum specification numbers apply.
SOIC-8
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
AT-250
Voltage Variable Absorptive Attenuator 12 dB, DC - 2.0 GHz
Typical Performance Curves
Insertion Loss vs. Frequency
4
Rev. V4
Attenuation vs. Frequency
20
Atten5 Atten10 Atten15
3
+25C -40C +85C
15
2
10
1
5
0 0.0
0.5
1.0
1.5
2.0
0 0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
VSWR vs. Frequency
2.0
Attenuation vs. Control Voltage, F = 950 MHz
15
1.8
10
1.6
0 dB 12 dB 5 dB
1.4
5
1.2
1.0 0.0
0.5
1.0
1.5
2.0
0 -3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0.0
Frequency (GHz)
Control Voltage (V)
Phase vs. Control Voltage, F = 950 MHz
30
20
10
0 -3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0.0
3
Control Voltage (V)
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.


▲Up To Search▲   

 
Price & Availability of AT-250

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X